Looking to get a Tornado baseline for Cura 3
#1
I'm using Simplify3D mainly, but I want to try the new Cura and I'm wondering if anyone has any good baseline settings or setting files for the Tornado.  Thanks in advance.


Neal

Tevo Tornado
QUBD OneUp
Prusa i3 clone (https://www.toms3d.org/dolly home made, still in progress)
  Reply
#2
For the tornado on CURA use CR10 profile to have a good baseline profile
  Reply
#3
(01-08-2018, 04:18 AM)nmulcahy Wrote: I'm using Simplify3D mainly, but I want to try the new Cura and I'm wondering if anyone has any good baseline settings or setting files for the Tornado.  Thanks in advance.

; start_gcode
M117 Start Clean ; Indicate nozzle clean in progress on LCD
;
M104 S[extruder0_temperature]
M109 S[extruder0_temperature]
M109 R[extruder0_temperature]
;
M107 ; Turn layer fan off
G21 ; Set to metric [change to G20 if you want Imperial]
G90 ; Force coordinates to be absolute relative to the origin
G28 ; Home X/Y/Z axis
;
G1 X3 Y1 Z15 F9000 ; Move safe Z height to shear strings
G0 X1 Y1 Z0.2 F9000 ; Move in 1mm from edge and up [z] 0.2mm
G92 E0 ; Set extruder to [0] zero
G1 X100 E12 F500 ; Extrude 30mm filiment along X axis 100mm long to prime and clean the nozzle
G92 E0 ; Reset extruder to [0] zero end of cleaning run
G1 E-1 F500 ; Retract filiment by 1 mm to reduce string effect
G1 X180 F4000 ; quick wipe away from the filament line / purge
M117 End Clean ; Indicate nozzle clean in progress on LCD
;
M117 Printing...
; Begin printing with sliced GCode after here
;

*****************************************************************************************

;
; end_gcode
G92 E0 ; zero the extruded length
G1 E-5 F9000 ; retract
M104 S0 ; turn off temperature
M140 S0 ; turn off bed
G91 ; relative positioning
G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+20 E-5 X-20 Y-20 F7200 ; move Z up a bit and retract filament even more
G1 X320 Y150 F10000 ; move right mid
M107 ; turn off layer fan
M84 ; disable motors
G90 ; absolute positioning
;
;EOF
  Reply




Users browsing this thread: 1 Guest(s)