Tevo Owners
BLTouch + Dual Z + TMC2208 Config - Printable Version

+- Tevo Owners (https://tevo-owners.com)
+-- Forum: TEVO Tarantula Pro (https://tevo-owners.com/forumdisplay.php?fid=52)
+--- Forum: Modifications & Upgrades (https://tevo-owners.com/forumdisplay.php?fid=56)
+--- Thread: BLTouch + Dual Z + TMC2208 Config (/showthread.php?tid=149)

BLTouch + Dual Z + TMC2208 Config - wickwire - 09-16-2019

Currently, the Tevo github repos for the Tarantula Pro do not include an "all-in-one" firmware version to support:

BL Touch sensor
Dual Z motors (Using the Extruder 2 driver)
TMC2208 silent stepper drivers

Tevo has published several zip archives for their firmware source mod, based on Marlin 1.1.9 but only for the following variants:

BLTouch + Dual z firmware.zip
Dual z firmware.zip
TMC2208 firmware.zip
Tarantula Pro firmware

Since I ended up getting the bundle with all 3 extras, I have decided to fork their github repo, merge the configs from BLTouch + Dual z firmware.zip and TMC2208 firmware.zip and publish the merged version to my fork on github.

Forked repo: https://github.com/wickwire/Tarantula-pro
Branch: 20190716_dualz_bltouch_tmc2208

This version includes support for all three extras and can be flashed on the board as usual, using the Arduino IDE - I used v1.8.9.